BobuxBOT

Luarmor not working: the five checks, in order

Five checks in order: the key page, the service, the executor, the key and the cache. A code only appears once the request reaches Luarmor, so the first and last checks have to be recognised from the symptom.

When a Luarmor script stops, the last message on screen is rarely the cause. Work through five checks in order: whether the key page gave you a key, whether the service answers, whether your executor is supported, whether the key is valid on this device, and whether an old cached copy is running. Each failure leaves a different symptom.

1. The key page never gave you a key

If you never received a key, the other four checks do not apply yet. The failure happened before the loader asked the service anything.

A thread on r/ROBLOXExploiting describes a page that fails before it issues a key, with the adblocker and VPN already disabled, and the same error on a second laptop. That points at the page's ad flow or the network, not at the service, the executor, the key or the cache.

The page belongs to the seller. Try a different browser or network, then ask the seller. Failures that happen before a key exists are listed in The key system page. Once you have one, continue with the five key checks.

2. The service is not answering

A Luarmor loader touches three hosts. The loader body comes from api.luarmor.net. The second stage comes from cdn.luarmor.net. The key check goes to an auth node. If the first request fails, nothing else runs and no key code appears.

The symptom is usually silence or a raw HttpGet error. UNKNOWN_ERROR is more specific: the documentation describes it as an upstream connection that closed, from an outage or an API restart. In that branch the key was never judged.

Test from the network where the script fails, not from a phone on mobile data. Ask whether other people running the same script see the same failure. If every script from the seller fails at the first line, the common piece is the service, not your key.

The loader is generated per request, so a saved copy proves little about today. In the copy we downloaded on 19 October 2026, two requests 28 seconds apart returned different bytes and different hashes. A browser tab that loads the URL only shows that your browser can reach it, not that your executor can.

Luarmor publishes no status page. When a host is down, the signal worth having is other users failing at the same moment. The cases where a local failure and a shared one look alike are in Luarmor status and outages.

3. The executor is not supported

If the game kicks you with a message about your executor, the key was never read. Luarmor's second stage is 327 bytes in the copy we fetched, and it does one thing: LocalPlayer:Kick with the text that your executor is not supported, then a while wait(1) loop.

The official code for this branch is INVALID_EXECUTOR. The documentation describes it as invalid data in the HWID header and adds that the executor might not be supported. Support is decided by the service from what the client sends, not by the script.

Updating the executor is the first thing to try, because the service recognises a client by its fingerprint and user agent. If a friend runs the same loader without the message, the difference is the client, not the key. For why the service rejects a client in the first place, see Executor not supported by Luarmor.

Do not buy a second key for this message. The key is not part of the request that failed.

4. The key is not valid here

Once the client is accepted, the key check runs. Five codes cover almost every failure.

What you see Code What it means
Key rejected as wrong KEY_INCORRECT The key is not in the project's database
Key rejected as malformed KEY_INVALID Empty, too short or too long
Key stopped after working KEY_EXPIRED The expiry date has passed
Works elsewhere, not here KEY_HWID_LOCKED Bound to a different HWID
Key blocked KEY_BANNED Blacklisted

KEY_INCORRECT looks like a typing error but often is not. A key belongs to one project. A key from another script, or from a project the seller deleted and recreated, will not validate even when the characters are perfect.

KEY_HWID_LOCKED needs a reset, not a purchase. The seller's bot can reset the hardware link, and some sellers let users reset it themselves. What counts as a new device is in Luarmor HWID locked.

KEY_EXPIRED and KEY_BANNED need the seller. No local step changes either one. The full set of codes is in Luarmor error codes.

5. A cached second stage is running instead

The loader checks a local file before it touches the network. In our copy the path is static_content_170926/init-<script-id>-ocmid.lua. If the file is longer than 2,000 characters, the loader tries to compile and run it. When it compiles, nothing is downloaded.

The check compares nothing else. There is no hash, no version and no timestamp comparison. A file left by an older build is accepted as long as it is long enough. That is why a script can keep an old bug after the seller ships a fix, and why a key that works on a fresh machine can appear broken on a machine that has run the script for weeks.

Three ways to clear it:

  1. Call purge_cache() from the seller's library or script, which the documentation describes as an attempt to delete the cached obfuscated build.
  2. Delete the static_content_... folder from the executor workspace.
  3. Run the loader again after either step, so it downloads a fresh second stage.

The folder sits in the executor workspace. The path is in What is the static_content folder, and the list of what the call removes and what it leaves behind is in What purge_cache() does.

What to send the seller

A useful ticket has six lines: the exact code and message, the time with your timezone, the executor name and version, the script name, what you changed before it broke, and whether other scripts from the same seller work. A screenshot of the console is better than a screenshot of the kick text.

Send the key inside the ticket, not in a public channel.

When the fault is not yours

SCRIPT_ID_INCORRECT means the loader names a script the service does not have, usually because the project was recreated or the loader is old. SCRIPT_ID_INVALID means the ID in the URL is damaged. UNKNOWN_ERROR across several users points at the service. None of the three is fixed by a new key.

FAQ

Can a Luarmor problem be fixed by reinstalling the executor?

A clean install can help when the client was modified and now sends a malformed request, which shows up as INVALID_EXECUTOR or SECURITY_ERROR. It does nothing for KEY_EXPIRED, KEY_BANNED or a service outage. Reinstall only after you have read the code, so you know which layer failed.

Does a VPN fix a script that stopped working?

Rarely. A VPN changes your IP address, not your hardware fingerprint or the name your executor sends. It can make an ad session fail its integrity check, because the documentation ties that session to an IP address. Turn it off while you test, then compare the result with and without it.

Why does the same loader work for my friend?

The loader is not the variable. Your friend's client sends a different fingerprint, and their machine has a different HWID. If they pass the executor check and you do not, the service does not recognise your client. If you both pass and only you fail the key check, the difference is the state of your key.

How can I tell whether Luarmor is down?

Run another script from a different seller. If both fail before any key code, the shared piece is the service. UNKNOWN_ERROR from several users at once is the clearest sign. Luarmor publishes no status page, so reports from other users carry more weight than one failed launch.

Can I use the same key on my phone after it worked on my PC?

Only after a reset, because the key is linked to the first HWID that used it. On a phone the client also has to be one the service recognises. If the phone shows the executor message, a reset will not help. If it shows KEY_HWID_LOCKED, the reset is the step.

What if the seller has stopped answering?

You can still reset your own HWID if the seller enabled that option in the bot. Expiry and blacklist states cannot be changed from your side. If the project is gone, the loader points at an ID that no longer exists, and no local step brings it back.

Does deleting the script folder remove the cached build?

Only if you delete the cache folder itself. In our copy the loader uses static_content_170926, not the folder where the script was downloaded. Deleting the wrong folder leaves the cached second stage in place, and the next run tries to load it before going to the network. Use purge_cache() or delete the exact folder.

Search Roblox games

Popular now Pick a result to open its page
↑↓ navigate ↩ open esc close